If you want to learn how to connect Xbox 360 controllers to PC, this article will provide you with the information you need. When buying an Xbox, there are two types available in the market: one is the wireless controller, which is used for wireless gaming.
Wired Controller Applied
You can also use the wired controller. Both of them can be used without any problem. When connecting Xbox controller to PC, there are some things you should do first. It is better to read the instructions carefully before setting off to connect your controller.
Connecting Xbox 360 Controller to PC:
Step 1: Hold up your xbox 360 controller in front of your mouth and plug the cable into your USB port.
Step 2: Windows 10 automatically will install drivers for Xbox 360 from your system. If you get a message that the drivers are not found, you have to uninstall and reinstall them.
Step 3: After doing so, open Device Manager by clicking Start > All Programs > Accessories. In the result, open Xbox 360 Drivers. Check the device to see if it is recognized properly. If not, search for the manufacturers’ website and download updated drivers.
Step 4: Now, you are ready to connect your xbox one controller to your system. The first step is to insert the wireless adapter into your computer. Follow the prompts. It is important to note that this step is performed to verify if the wireless adapter is working properly. If it is not connected, you should try the following steps. They will help you in determining if you need to replace or repair your wireless adapter.
*Router Configuration – connect xbox to pc
Most likely, your router must also be configured to work with Xbox 360 controllers. If not, you will have to go to your router’s website and follow the instructions for configuring the device. Usually, this process requires the use of the router’s web-based interface.
*Find a Compatible Cord
If you are using a wired xbox 360 controller, it is now time to find a compatible cord. You can use your original power adapter for your console or use the wireless adapter. You can plug the cord into an appropriate location on your router. If your router has an optical input, make sure that it can be seen. If not, it will be necessary to install an optical input.
*Most Controller with Windows
Most controllers for xbox can also be used with Windows Vista, so you don’t have to worry about installing the drivers.
However, the only thing that you need to do is to install the USB driver into your computer first. Once it is already installed in your machine, you can easily plug the controller into your computer using the USB cable.
Once you have successfully installed the controller, you will then be able to complete the installation process.
*Reinstall Wireless Controller – connect xbox to pc
The last step in how to connect X Box 360 controller to PC is to install the wireless controller driver. Again, it is usually very easy to install it. Simply follow the steps outlined in your manufacturer’s manual. There’s really nothing difficult about this procedure, and you can see results within minutes.
How to connect Xbox 360 wireless controller to pc should not be complicated at all. Just like any other peripherals, you have to follow the correct instructions to ensure that you get the best experience. The most important thing to remember is to connect the xbox 360 wireless controller to your computer using the proper ports.
The Xbox 360 wireless controller connects with the use of IR LEDs. This is done by the controller transmitting IR pulses from one end to the receiver. This transfers the data from the transmitter to the receiver. It is important to note that there is a protocol that must be followed in order to correctly send the pulse and receive the result. Once you are able to follow this protocol, the Xbox 360 will recognize the pulses and respond accordingly.
*Install Necessary Drivers
Once the Xbox 360 wireless xbox controller is successfully connected to the computer, you must install the necessary drivers. For this, you will need to go to the device manager and select add/remove device. Once you have done so, the next step is to find the Xbox 360 wireless adapter. You will need to click on it and then move the mouse cursor inside the device manager window. The device driver should be listed at the bottom of the window.
Once the wireless xbox 360 controller has been installed, you can now connect the wireless adapter to the computer. After you have done this, you can see the wireless controller icon on the system tray. Next, you will have to install the Bluetooth drivers. For this, you can go to the software section and select Driver under Drivers tab. Once you have done this, you will be able to pair the wireless xbox 360 controllers with your pda or laptop.